Products

Results: 90Submittal cart
Uponor AquaPEX white coils

Uponor AquaPEX white coils

Uponor AquaPEX white piping is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing.Uponor AquaPEX white tubing is manufactured and listed to ASTM F876 and F877 and CSA B137.5, certified to NSF Standards 14 and 61 and listed by the Hydrostatic Stress Board of PPI at 200°F (93.3°C) at 80psi, 180°F (82.2°C) at 100psi and 73.4°F (23°C) at 160psi.Uponor AquaPEX white tubing is marked with the PEX 5106 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140°F while also affording a one-month UV-resistance level.

Uponor AquaPEX reclaimed water coils and straight lengths

Uponor AquaPEX reclaimed water coils and straight lengths

Uponor AquaPEX piping is used in hot and cold water distribution systems and AquaSAFE™ residential fire safety systems. Uponor AquaPEX pipe is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX tubing coils and straight lengths come in red, white and blue for potable-water applications, and purple for water-reclamation applications. Uponor AquaPEX reclaimed water tubing has an outer purple coating specifically designed for use in reclaimed or graywater distribution systems.

Uponor AquaPEX white straight lengths

Uponor AquaPEX white straight lengths

Uponor AquaPEX white piping is marked with the PEX 5106 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140°F (60°C) while also affording a one-month UV-resistance level.

Uponor AquaPEX red coils

Uponor AquaPEX red coils

Use Uponor AquaPEX red piping for potable hot-water distribution systems. The pipe is marked with the PEX 5306 designation as required by the most recent edition of ASTM F876, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140°F (60 °C) while also affording a six-month UV-resistance level.

Solid color lacquer piping is currently not available. White piping with colored print is available as an alternative.

Copper (type L) valveless manifolds

Copper (type L) valveless manifolds

Copper valveless manifolds with 1/2" or 3/4" nominal branches are available in various outlet configurations. The manifolds can join together to create the desired number of outlets. Branches are brazed to the manifold trunk. Use Uponor QS-style or ProPEX 1/2" or 3/4" brass sweat adapters to make connections to 3/8", 1/2", 5/8" and 3/4" Uponor AquaPEX tubing. All manifolds require a 1" copper end cap and applicable transition fitting.Note: Maximum recommended flow rates for these manifolds are: 2", 45 gpm; 1 1/2", 21 gpm; 1",9 gpm.

 

This product is made to order, please contact customer service for lead time.

Pre-sleeved Uponor AquaPEX coils

Pre-sleeved Uponor AquaPEX coils

Pre-sleeved Uponor AquaPEX® tubing is used in hot and cold water-distribution systems. The highdensity polyethylene (HDPE) corrugated sleeve provides protection for installations in concrete slabs or soil, and allows for removal and replacement of the tubing if required. Note: This tubing can also be used in radiant heating and cooling systems containing no ferrous corrodible components or where ferrous components are isolated from the tubing.

HDPE corrugated sleeves

HDPE corrugated sleeves

High-density Polyethylene (HDPE) Corrugated Sleeves are used in hot and cold potable-water distribution systems, primarily in commercial applications where the potable tubing is installed in the slab. Designed for use with Uponor AquaPEX® crosslinked polyethylene (PEX-a) tubing, the sleeve provides protection during installation and allows for removal and replacement of the tubing, if necessary. This product can also be used in radiant heating and cooling systems with Wirsbo hePEX™ tubing. However, if using Uponor AquaPEX tubing (which does not have an oxygen barrier), the tubing can only be used in systems containing no ferrous corrodible components or where ferrous components are isolated from the tubing.

Uponor AquaPEX blue coils

Uponor AquaPEX blue coils

Uponor AquaPEX piping is used in hot and cold water distribution systems and AquaSAFE™ residential fire safety systems. Uponor AquaPEX pipe is suitable for use in hydronic heating applications where the system contains no ferrous corrodible components or where any ferrous components are isolated from the tubing. Uponor AquaPEX tubing coils and straight lengths come in red, white and blue for potable-water applications, and purple for water-reclamation applications. Uponor AquaPEX blue tubing is marked with the PEX 5306 designation as required by the most recent edition of ASTM F876-15a, indicating it exceeds ASTM F876 chlorine-resistance requirements for continuous-recirculation systems operating up to 140°F (60 °C) while also affording a six-month UV-resistance level.

Solid color lacquer piping is currently not available. White piping with colored print is available as an alternative.